1 02/06/84  disk_report, drp, disk_auto
 2 
 3 Syntax:  drp
 4 
 5 
 6 Function:  calculates disk usage and creates a disk usage report.  The
 7 administrator can invoke the disk_report command to cause a manual disk
 8 usage calculation.  Normally, though, disk usage is calculated
 9 automatically every night by the absentee job, dodrp.absin, that
10 executes the disk_auto command.
11 
12 
13 Notes:  The sweep program is used to get quota for all directories into
14 the disk_stat data segment (in >udd>SysAdmin>admin).  The charge_disk
15 program then charges these usage figures to projects in their
16 "projfile" entries.  A printable segment, called diskreport, is
17 produced but not automatically printed.  To print copies of this
18 segment, type "rqm diskreport".  See the rqm command.
19 
20 This command examines a large fraction of all the directories in the
21 hierarchy, placing a heavy load on the system.  Its use during peak
22 load hours should be avoided if possible.