urp_dev           797 src/dps8/dps8_cable.c                            & urp_dev,
urp_dev          1175 src/dps8/dps8_cable.c     if (ctlr_unit_idx >= urp_dev.numunits)
urp_dev          4969 src/dps8/dps8_sys.c     & urp_dev,
urp_dev            93 src/dps8/dps8_urp.c     sim_printf("Number of URP units in system is %d\n", urp_dev.numunits);
urp_dev           104 src/dps8/dps8_urp.c     urp_dev.numunits = (uint32) n;
urp_dev           169 src/dps8/dps8_urp.c DEVICE urp_dev = {
urp_dev           214 src/dps8/dps8_urp.c   if_sim_debug (DBG_TRACE, & urp_dev) dumpDCW (p->DCW, 0);
urp_dev           229 src/dps8/dps8_urp.c         if_sim_debug (DBG_TRACE, & urp_dev) { sim_printf ("// URP Request Status\r\n"); }
urp_dev           230 src/dps8/dps8_urp.c         sim_debug (DBG_DEBUG, & urp_dev, "%s: Request Status\n", __func__);
urp_dev           235 src/dps8/dps8_urp.c         if_sim_debug (DBG_TRACE, & urp_dev) { sim_printf ("// URP Initiate Read Data Xfer\r\n"); }
urp_dev           236 src/dps8/dps8_urp.c         sim_debug (DBG_DEBUG, & urp_dev, "%s: Initiate Read Data Xfer\n", __func__);
urp_dev           245 src/dps8/dps8_urp.c         if_sim_debug (DBG_TRACE, & urp_dev) { sim_printf ("// URP Set Diagnostic Mode\r\n"); }
urp_dev           246 src/dps8/dps8_urp.c         sim_debug (DBG_DEBUG, & urp_dev, "%s: Set Diagnostic Mode\n", __func__);
urp_dev           252 src/dps8/dps8_urp.c         if_sim_debug (DBG_TRACE, & urp_dev) { sim_printf ("// URP Reset Status\r\n"); }
urp_dev           253 src/dps8/dps8_urp.c         sim_debug (DBG_DEBUG, & urp_dev, "%s: Reset Status\n", __func__);
urp_dev           259 src/dps8/dps8_urp.c         if_sim_debug (DBG_TRACE, & urp_dev) { sim_printf ("// URP unknown command %o\r\n", p->IDCW_DEV_CMD); }
urp_dev           267 src/dps8/dps8_urp.c     sim_debug (DBG_DEBUG, & urp_dev, "%s: stati %04o\n", __func__, p->stati);
urp_dev           274 src/dps8/dps8_urp.c       if_sim_debug (DBG_TRACE, & urp_dev) { sim_printf ("// URP IOT no mode\r\n"); }
urp_dev           281 src/dps8/dps8_urp.c       if_sim_debug (DBG_TRACE, & urp_dev) { sim_printf ("// URP IOT Set Diag\r\n"); }
urp_dev           287 src/dps8/dps8_urp.c       if_sim_debug (DBG_TRACE, & urp_dev) { sim_printf ("// URP IOT Init Rd Data\r\n"); }
urp_dev           293 src/dps8/dps8_urp.c       if_sim_debug (DBG_TRACE, & urp_dev) { sim_printf ("// URP IOT unknown %d\r\n", statep->ioMode); }
urp_dev            19 src/dps8/dps8_urp.h extern DEVICE urp_dev;