urp_dev           802 src/dps8/dps8_cable.c                            & urp_dev,
urp_dev          1198 src/dps8/dps8_cable.c     if (ctlr_unit_idx >= urp_dev.numunits)
urp_dev          5081 src/dps8/dps8_sys.c     & urp_dev,
urp_dev            96 src/dps8/dps8_urp.c     sim_printf("Number of URP units in system is %d\n", urp_dev.numunits);
urp_dev           107 src/dps8/dps8_urp.c     urp_dev.numunits = (uint32) n;
urp_dev           172 src/dps8/dps8_urp.c DEVICE urp_dev = {
urp_dev           216 src/dps8/dps8_urp.c   if_sim_debug (DBG_TRACE, & urp_dev) dumpDCW (p->DCW, 0);
urp_dev           231 src/dps8/dps8_urp.c         if_sim_debug (DBG_TRACE, & urp_dev) { sim_printf ("// URP Request Status\r\n"); }
urp_dev           232 src/dps8/dps8_urp.c         sim_debug (DBG_DEBUG, & urp_dev, "%s: Request Status\n", __func__);
urp_dev           237 src/dps8/dps8_urp.c         if_sim_debug (DBG_TRACE, & urp_dev) { sim_printf ("// URP Initiate Read Data Xfer\r\n"); }
urp_dev           238 src/dps8/dps8_urp.c         sim_debug (DBG_DEBUG, & urp_dev, "%s: Initiate Read Data Xfer\n", __func__);
urp_dev           247 src/dps8/dps8_urp.c         if_sim_debug (DBG_TRACE, & urp_dev) { sim_printf ("// URP Set Diagnostic Mode\r\n"); }
urp_dev           248 src/dps8/dps8_urp.c         sim_debug (DBG_DEBUG, & urp_dev, "%s: Set Diagnostic Mode\n", __func__);
urp_dev           254 src/dps8/dps8_urp.c         if_sim_debug (DBG_TRACE, & urp_dev) { sim_printf ("// URP Reset Status\r\n"); }
urp_dev           255 src/dps8/dps8_urp.c         sim_debug (DBG_DEBUG, & urp_dev, "%s: Reset Status\n", __func__);
urp_dev           261 src/dps8/dps8_urp.c         if_sim_debug (DBG_TRACE, & urp_dev) { sim_printf ("// URP unknown command %o\r\n", p->IDCW_DEV_CMD); }
urp_dev           269 src/dps8/dps8_urp.c     sim_debug (DBG_DEBUG, & urp_dev, "%s: stati %04o\n", __func__, p->stati);
urp_dev           276 src/dps8/dps8_urp.c       if_sim_debug (DBG_TRACE, & urp_dev) { sim_printf ("// URP IOT no mode\r\n"); }
urp_dev           283 src/dps8/dps8_urp.c       if_sim_debug (DBG_TRACE, & urp_dev) { sim_printf ("// URP IOT Set Diag\r\n"); }
urp_dev           289 src/dps8/dps8_urp.c       if_sim_debug (DBG_TRACE, & urp_dev) { sim_printf ("// URP IOT Init Rd Data\r\n"); }
urp_dev           295 src/dps8/dps8_urp.c       if_sim_debug (DBG_TRACE, & urp_dev) { sim_printf ("// URP IOT unknown %d\r\n", statep->ioMode); }
urp_dev            22 src/dps8/dps8_urp.h extern DEVICE urp_dev;